C-roll forming machine cleaning, did you do it right?

News

Address：No.500 Qianhu Road, Huishan District, Wuxi City

Industry News Location：Home > News > Industry News > C-roll forming machi...

C-roll forming machine cleaning, did you do it right?

Source： │ Datetime：2020-02-24

The application of Weihua Machinery's C Channel Roll Forming Machine is mainly to produce C-channel. The machine is mainly composed of passive loading rack, leveling device, punching device, cutting device after molding, hydraulic station, computer distribution cabinet system, etc., which also includes hydraulic components, hydraulic oil circuit and filter. No matter how good the quality of the C Channel Roll Forming Machine and the good daily maintenance can extend the use of the C Channel Roll Forming Machine, Weihua Machinery summarized the maintenance methods of the hydraulic components, hydraulic oil lines and filters of the three major parts of the C Channel Roll Forming Machine.

First, hydraulic components
1. The components of the hydraulic part (substrate, valve, motor, pump, oil pipe, etc.) need to be cleaned every month to prevent foreign objects from entering the system. Check for foreign matter and deformation marks on the bends of the oil pipes of the C-shaped steel forming machine.
2. After using the new C-type roll forming machine for two months, it should be replaced if it is abnormal. After two months of use, the joints of all accessories should be tightened, and the system should be shut down when performing this work without pressure.
Pay special attention to the cleaning of hydraulic components of C-type roll forming machines without using detergents;

Hydraulic oil tank
1. Check the oil level of the fuel tank every week. The oil level should be filled with hydraulic oil below the oil window; it must not exceed 70 ° C.
2. System oil temperature should be between 35 ℃ ～ 60 ℃. If it is too high, it will cause the deterioration of oil quality and accessories.
3. The oil of the new machine should be changed after 2000 hours of work, and after every 40006000 hours of work, it should be changed. The fuel tank should be cleaned every time the oil is changed.

The filter

1. Check and clean every 3 months when changing oil;
2. The air filter on the fuel tank should be replaced within one year;
3.The machine tool has related alarms or the oil quality is not clean and other filters are abnormal.

The daily maintenance of the three major components of the C-shaped roll forming machine determines the cutting and guarantees the accuracy of the C-shaped steel. The use of hydraulic cutting will not generate other additional waste. Although cleaning the CZ roll forming machine is not laborious, but it is a detail, usually you cannot be lazy, or the benefits brought by the cleaning machine will be found in the formal production.

News

What can C Channel roll forming machine make?2020-02-25
PU foaming machine failure and troubleshooting2020-03-17
Four-operation items and two purchase skills of polyurethane foaming machine2020-09-30
Types of sandwich panel production line2020-05-26
The role of the foaming machine flowmeter2019-07-12
Continuous and discontinuous sandwich panel production line2020-05-26

Products

Discontinuous 3+3 Sandwich Panel Machine
MORE >
Continuous PU Sandwich Panel Production Line
MORE >
Box Beam Roll Forming Machine
MORE >

Order Now!

C-roll forming machine cleaning, did you do it right?

Discontinuous 3+3 Sandwich Panel Machine

Continuous PU Sandwich Panel Production Line

Box Beam Roll Forming Machine

Cookies